curing temperature的例句大全

For traditional thermal curing powder coatings, there has a big limit of high curing temperature.

但普通的粉末涂料存在固化温度偏高,不能用于热敏性底材,限制了其应用范围.

When curing temperature was preferred to be 260 and the percentage of solidification agent was 3 %.

固化剂质量分数为3%,固化温度为260℃时得到的膜的性能最佳.

It's curing temperature high and difficult to molding.

聚酰亚胺固化温度太高,并且难于成型加工.

Of course, curing temperature is not possible.

当然固化温度并不是越高越好.

The hardness of highlights oil and different light oil have different best curing temperature.

度高光油的硬度好,而且不同的光油有不同的最佳固化温度.

A method for automatic extending the tire curing period at a subnormal temperature was proposed.

介绍一种轮胎硫化欠温自动延时的办法。

Preparation and Properties of the Room Temperature Rapid Curing Epoxy Resin Adhesive

室温快固化环氧胶的制备技术及性能研究

Research of room temperature rapid curing aerobic acrylic Adhesive

室温快固需氧丙烯酸酯胶粘剂的研究

A Study on the Application of Low Temperature and Rapid Curing Type Binder DK-884 for Pigment Printing Process

DK-884低温快固型涂料印花粘合剂的应用研究

Rheological Properties of Room Temperature Quick Curing Non-Solvent Polyether Urethane Adhesives

室温快速固化非溶剂聚醚氨酯胶的流变性能

The Numerical Simulating of the Temperature Fields in Massive Concrete Base During Curing Period

大体积混凝土基础养护期温度场数值模拟

Low Temperature Curing DP Finishing of Cotton Clothes

棉服装低温固化耐久定形整理

The numerical simulation method can be used to optimize the curing temperature cycle, which can improve the quality of composite products.

模拟程序可以计算得到任意时刻复合材料内温度及固化度分布，通过数值模拟可以有效地优化固化加热工艺参数，提高产品质量。

The results show that the comprehensive properties of room temperature curing DAIP resin system are better.

结果表明:室温固化DAIP树脂体系具有较好的综合性能.

Influences of Temperature and Composition on the Curing Mechanism in BDMA/ DICY/ DGEBA System

温度和组成对苄基二甲胺/双氰胺/环氧树脂体系固化反应历程的影响

Experiment indicated that TPX mould was an ideal plastic mould for casting of epoxy resin which was suitably curing at high or middle temperature.

实验表明它是一种适用于高、中温固化环氧树脂浇铸成型的理想的塑料模具。

This development has solved the key technical points of curing room temperature.

该防水卷材胶料的研制,主要解决了室温硫化的技术关键.

Graded polyurethane elastomers were prepared by curing in graded temperature field.

利用温度梯度固化的方法制备了厚度方向的梯度聚氨酯弹性体.

This paper studies the effect of the formulation of the cold curing epoxy copper powder electric conductive adhesive, curing temperature, curing velocity, using temperature pot life and storage life on the properties of the adhesive.

本文研究了冷固化环氧型铜粉导电胶的配比、固化温度、固化速度、使用温度、各种介质、适用期和贮存期对性能的影响。

High Temperature Rapid Curing One-Component Epoxy Adhesive and its Application

高温快速固化单组份环氧胶粘剂及其应用